[PsTwo] LuxTwo Playstation Two Portable

[Luigid]

some specifications:
absorption:
standby:
0.30A
screen and fan (at most) on:
0.52A
lit:
Min 1.8 A - 2.0 A max at full load with hardisk
7 " screen
x2 2W speaker
250gb hdd internal
64 mb memory card Internal

Ok, finished to 80% lacks the 2 joypad and memorycard slot, status led hardisk and dualshock on / off. Now I put a potentiometer horizontal (not the knob) and a switch to read the hardisk or ps2 or pc to insert new games. and ah over lacks the back panel with the buttons r1 r2 l1 l2.
As a regulator dc-dc I used one that was used in cars to connect the PS2, is very good and warms up very little, even though it cost about 15 euro unlike a texas instrument that's what 6A is very expensive (or at least in Italy).

I'm here to inform you that the play is almost finished I just have to re-varnishing the front, it took quite a lot of days because I went to sea :waiting:
here is the back:

WorkLog 1:
http://www.youtube.com/watch?v=_tmVLkA3vek
2:
http://www.youtube.com/watch?v=baG4Bw-NKl0
3:
http://www.youtube.com/watch?v=gC9Y6O_u2bQ
4:
http://www.youtube.com/watch?v=bqFiK7wNPhA
5:
http://www.youtube.com/watch?v=N8-WwNh5OhA
6:
http://www.youtube.com/watch?v=Ec3ZxlFoXcs